Home > Shop > Clearance >

InwallTech HD-650W High Definition Wall Speakers

InwallTech HD-650W High Definition 6 1/2" Wall Speakers


 
More Images


This is an open box item
Compare at: $229.00
Sale Price: $125.00 pair
Sale Extended Thru: 12-11-17

Stock Status:
In Stock

Availability: Usually ships same day before 3 Eastern Time!
Product Code: CLEARHD650W
Qty:

Description Technical Specs
 
"Finally, our flagship line of speakers are here! This HD line of speakers are very good....and very good for the price. We should sell these for more, but we can't in good conscience. Factory direct from a strong retailer is your best bet these days...no middle-man"
Brian Kruse
Inwallstore.com

The Kevlar® in the woofers (for low frequencies), is a high-end speaker material that is very lightweight and resists flexing under stress. This means that you get smooth steady low frequencies without distortion at even higher sound pressure levels.

The Titanium in the tweeters (for high frequencies), is another high end material pioneered by JBL and now widely available in better speakers. Titanium is also a very very light material that is extremely rigid. This allows the material to move faster than other materials used in tweeter assemblies (like poly carbonate, silk or aluminum). That speed is what produces crisp, clean and clear highs that extend past even the most sensitive listeners range of audibility.
Kevlar/Titanium combination's are widely found in far more expensive high end speakers that for years were out of reach of the everyday homeowner.

Fully paintable as well.

The HD650W has that design that balances features, good sound, good looks at a very good price.
These speakers are sold in pairs for the price listed.

-Woofer: 6 1/2" Kevlar cone with inverted butyl rubber surround, 1" voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure Titanium Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB board, independent 12 db woofer section, 12 db tweeter section, Polyimide auto protect over power reset automatic switch, Gold plated terminal posts will accept up to 14 AWG wire.
- 3/ 0/ +3 db attenuation switchs for independent tweeter and woofer control
-Impedance: Switchable 4 or 8 ohm
-Sensitivity: 89 db measured with 1 watt / 1 meter away
-Maximum Thermal Power Rating: 125 Watts
-Frequency Response: 45 Hz - 22,000 Hz
-Dimensions: 12 1/8" x 8 3/4" x 3 1/2"

Installation Tip for Starting Dog Ear Mounting


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop > Clearance