 |
 |
 |
|
| "8 out of the 10 people who listened to these thought --that's a nice sounding speaker--"
-Installer Brian Kruse, Inwallstore.com
We've just about sold out of our first shipment of these in around 2 months.
At 125 watts max power rating, you'll find it hard to run out of power! And if you do overdrive them a little at your next party/function/get-together, you'll be happy to know your investment is protected with an AUTOMATIC SHUT-OFF SWITCH. It detects when you've sent too much power for too long and shuts down until it's safe again to turn the speaker back on.
Manufactured at a ISO9001 factory standard, you will be assured for the 5 year warranty, that your speakers will perform exceptionally.
Installation will be easy for you with standardize dog-ear mounting tabs. All you need to do is use the provided template to cut a simple hole in the drywall and 4 screws later, you'll have the family dialed in for Home Theater action.
Engineered for a "popular" sounding speaker. We've been selling
speakers on the internet for over 10 years and we've paid attention to
what YOU want. This is our own brand of speakers made with you in
mind. You'll save money buying FACTORY DIRECT speakers. These are
imported directly to us, engineered for you. From samples we compared
what has sold best for us in the past and packaged these to outperform
the popular at a lower price to you.
You'll find a rich, robust,
full sound from the woofer and tight, defined, clear and present mids
and highs from the tweeter section.
All come with paintable white
grills with easy to install tab type (dog ear) mounting. Included in
the box will be a cutout template to make a perfect easy drywall cut to
install your new speakers. Just hook up the wires and screw the clamps
integrated on the speaker, insert the grill and turn it up!
But wait, we have to warn you about one little detail that most companies won't tell you. Don't worry, it's good news. Initially, the speakers will sound a little flat or hard in the bottom end. This is because of the internal suspension that comes a little rigid and needs to sort of "stretch it's legs" for a little while. After about 3 or 4 weeks things open up and you'll begin to notice enhanced bass and deeper lows.
- Woofer: 6.5", Aluminum Laminate PP cone with mica, rubber surround, 1" Voice coil, 22 oz magnet, vented pole piece
- Tweeter: 1" Synthetic Dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
- X-over: FR4 PCB board, 12dB woofer section, 12dB tweeter section
- Polyimide switch-auto protect reset switch, over power protection
- Gold plated terminal posts will accept 14AWG wire.
- Frequency Response: 50 Hz-22 Hz
- Sensitivity: 88dB at 1W/1M
- Maximum Thermal Rating: 125 watts
- Impedance: 8 ohms
- Overall Dimensions: 12 1/8" x 8 3/4" x 3 1/2"
Installation Tip for Starting Dog Ear Mounting
|
|
|
|
|
|
|
|
|
Copyright © 2009