Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces.

One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille.

Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces.

One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille.

Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The "business end" of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

These IR receivers are designed to mount in single-gang electrical J-boxes. The mounting screws and red lens insert allow the installer to use decorator-style wall plates.The ubiquitous 780 has been the choice of custom installers for years. Use it for general applications at lowest cost.

Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The "business end" of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.