www.inwallstore.com

You are here: Home > Whole House Audio > Speaker Selectors
Choose a sub category:
4 Pair Speaker Selectors 6 Pair Speaker Selectors
8 Pair Speaker Selectors 10 Pair Speaker Selectors
12 Pair Speaker Selectors Audioplex Speaker Selectors
Inwall Speaker Selectors Phoenix Gold Speaker Selectors
Russound Speaker Selectors
Sort By:
Page of 1
Premium Speaker Selector -- 4 Pairs Premium Speaker Selector -- 6 Pairs ArchiTech Pro-Wire 8 Pair Speaker Selector
List Price: $99.00
Our Price: $79.00
Sale Price: $49.00
You save $50.00! In Stock
List Price: $129.00
Our Price: $99.00
Sale Price: $64.99
You save $64.01! In Stock
List Price: $209.95
Our Price: $99.00
You save $110.95! In Stock
Most all of the budget speaker selectors are the same.  Same resistors inside, same resistor values, same resistor manufacturer part number. EXCEPT this one is designed in a SMART manner.  Look at the pictures and you'll see the resistors are RAISED off of the circuit board for BETTER COOLING.  That will lead to a longer life.  These also have vents that are right by the resistors.  Others don't think that part out.  So for the same price, these are better.
  • Push Buttons for 4 pairs of speakers (all on, only one or any combination at the same time)
  • Push Terminals on the back will accept up to 14 gauge wire
  • 100-watt max power handling  (8 ohms)
  • Frequency response: 20Hz-20,000Hz
  • RAISED RESISTORS
Most all of the budget speaker selectors are the same.  Same resistors inside, same resistor values, same resistor manufacturer part number. EXCEPT this one is designed in a SMART manner.  Look at the pictures and you'll see the resistors are RAISED off of the circuit board for BETTER COOLING.  That will lead to a longer life.  These also have vents that are right by the resistors.  Others don't think that part out.  So for the same price, these are better.
  • Push Buttons for 6 pairs of speakers (all on, only one or any combination at the same time)
  • Push Terminals on the back will accept up to 14 gauge wire
  • 100-watt max power handling  (8 ohms)
  • Frequency response: 20Hz-20,000Hz
  • RAISED RESISTORS
OEM switchers provide nominal 8 Ohm load for amplifier protection against low impedance loads. Barrier Termination Strip Construction provides positive wire terminations much superior to the Quick Connect type. This design is preferred by experienced installation experts over inferior quick connect types. Individual on/off switches for each pair of speakers. Heavy Duty metal chassis and cases with high grade circuit boards.

The SW-8SPKR is designed to allow up to 8 pairs of 8 Ohm speakers to be connected to a stereo amplifier or receiver without damaging the amplifier. These devices also function as Switching Stations to control all the speakers in a multi-room system from a central location.

The buttons are used to turn the individual pairs of speakers ON & OFF.
Wiring from the amplifier to the SW-8SPKR should be a minimum of 16 gauge. If wire is to be run through walls, it should be CL rated. For runs over 100 feet 14 gauge wire may be used.

17 W x 2 H x 5 1/4 Deep
100-Watt High Power Stereo 4 Pair Speaker Selector 100-Watt High Power Stereo 6 Pair Speaker Selector ArchiTech Pro-Wire 4 Pair Speaker Selector comes with FREE Tech16 Wall Plate!
List Price: $64.99
Our Price: $55.00
Sale Price: $49.87
You save $15.12! In Stock
List Price: $78.95
Our Price: $69.00
Sale Price: $64.99
You save $13.96! In Stock
List Price: $134.95
Our Price: $79.00
You save $55.95! In Stock
  • Push Buttons for 4 pairs of speakers (all on, only one or any combination at the same time)
  • Push Terminals on the back will accept up to 14 gauge wire
  • 100-watt max power handling  (8 ohms)
  • Frequency response: 20Hz-20,000Hz
  • 7 1/2" W x 2" H x 4 3/4" D
  • Push Buttons for 6 pairs of speakers (all on, only one or any combination at the same time)
  • Push Terminals on the back will accept up to 14 gauge wire
  • 100-watt max power handling  (8 ohms)
  • Frequency response: 20Hz-20,000Hz
  • 9" W x 2" H x 6" D
The SLX series speaker selectors are equipped with the all new and revolutionary MB-4 wiring harness connection system, which has the following exclusive benefits:

- Positive connections that will not work themselves loose like the popular spring clip or quick connect types.
- Dramatic time savings in installation and set-up
- Dramatic improvement in connection integrity  - absolutely superior quality terminations.
- Performance improvement
- Makes troubleshooting system connections extremely quick and easy

The SLX-4 includes 120 high quality pre-printed  labels that slip into the label channel above the room switches. -

These high quality labels are named with nearly every conceivable room or area name indoors and outdoors for both residential and commercial use, making these units highly adaptable and user friendly.
Audioplex AT-4 4 Pair Load Balancing Speaker Selector Audioplex AT-6 6 Pair Load Balancing Speaker Selector Audioplex PT-4 4 Pair Load Balancing Speaker Selector
List Price: $136.49
Our Price: $97.48
You save $39.01! In Stock
List Price: $274.72
Our Price: $196.23
You save $78.49! In Stock
List Price: $234.25
Our Price: $167.32
You save $66.93! In Stock
Audioplex AT-4 4 Pair Load Balancing Speaker Selector Audioplex AT-6 6 Pair Load Balancing Speaker Selector

The AT series of selectors, with TM automatic PurePath protection allows you the ease of choosing which rooms in your whole-house audio system are on or off from one convenient location. Automatic PurePath amplifier protection constantly processes how many speakers are selected and provides the purest possible path from the amplifier to the speaker.

The AT series of selectors, with TM automatic PurePath protection allows you the ease of choosing which rooms in your whole-house audio system are on or off from one convenient location. Automatic PurePath amplifier protection constantly processes how many speakers are selected and provides the purest possible path from the amplifier to the speaker.

Automatic PurePath Autoformer protection constantly processes how many speakers are selected and provides the purest possible path from the amplifier to the speaker. Ultimate fidelity for critical listening can occur in any room at any time - simply select only the room you are in and the PT selector automatically provides an absolute pure direct path to the speakers selected. As you engage more pairs of speakers

Audioplex PT-6 6 Pair Load Balancing Speaker Selector Audioplex MS-6 6 Pair Load Balancing Speaker Selector Audioplex MS-8 8 Pair Load Balancing Speaker Selector
List Price: $304.48
Our Price: $217.48
You save $87.00! In Stock
List Price: $347.98
Our Price: $248.57
You save $99.41! In Stock
List Price: $409.00
Our Price: $292.15
You save $116.85! In Stock
Audioplex MS-6 6 Pair Load Balancing Speaker Selector Audioplex MS-8 8 Pair Load Balancing Speaker Selector

Automatic PurePath Autoformer protection constantly processes how many speakers are selected and provides the purest possible path from the amplifier to the speaker. Ultimate fidelity for critical listening can occur in any room at any time - simply select only the room you are in and the PT selector automatically provides an absolute pure direct path to the speakers selected. As you engage more pairs of speakers

The Audioplex Master Series of selectors incorporates amplifier protection that does not waste amplifier power. All of the total power of your stereo is delivered globally to your multiroom speaker system. MS series selectors allow you to play any or all of your speakers at the same time. Regardless of the size of your system, the MS 6/8/10/12 selectors simply distribute everything your amplifier sends, safely and without loss. As you change the number of rooms/speakers playing, absolutely no change in volume or sound quality occurs. The secret to wastefree power distribution is the Master Series massive trifilar wound autoformers. Autoformers that are capable of distributing a 750 watt musical peak without distortion.

The MS series is designed and engineered to have a ruler-flat frequency response and ultra-low distortion. Audioplex delivers 20 to 20,000 Hz plus or minus .5dB.

Only Audioplex MS series selectors deliver all of your amplifier's power globally. This means that when the entire system is active, the power of your amplifier is perfectly distributed to each speaker. Of course, the system directs exactly the same amount of power to each speaker pair regardless of how many speakers are playing; so there are never any variations of volume when rooms are turned on and off.

The Audioplex Master Series of selectors incorporates amplifier protection that does not waste amplifier power. All of the total power of your stereo is delivered globally to your multiroom speaker system. MS series selectors allow you to play any or all of your speakers at the same time. Regardless of the size of your system, the MS 6/8/10/12 selectors simply distribute everything your amplifier sends, safely and without loss. As you change the number of rooms/speakers playing, absolutely no change in volume or sound quality occurs. The secret to wastefree power distribution is the Master Series massive trifilar wound autoformers. Autoformers that are capable of distributing a 750 watt musical peak without distortion.

The MS series is designed and engineered to have a ruler-flat frequency response and ultra-low distortion. Audioplex delivers 20 to 20,000 Hz plus or minus .5dB.

Only Audioplex MS series selectors deliver all of your amplifier's power globally. This means that when the entire system is active, the power of your amplifier is perfectly distributed to each speaker. Of course, the system directs exactly the same amount of power to each speaker pair regardless of how many speakers are playing; so there are never any variations of volume when rooms are turned on and off.

Audioplex MS-10 10 Pair Load Balancing Speaker Selector Audioplex MS-12 12 Pair Load Balancing Speaker Selector Russound Load Balancing Speaker Selector Pro6 HP 6 Pair
List Price: $526.74
Our Price: $376.24
You save $150.50! In Stock
List Price: $612.00
Our Price: $437.18
You save $174.82! In Stock
List Price: $350.20
Our Price: $250.15
You save $100.05! In Stock
Audioplex MS-10 10 Pair Load Balancing Speaker Selector Audioplex MS-12 12 Pair Load Balancing Speaker Selector

The Audioplex Master Series of selectors incorporates amplifier protection that does not waste amplifier power. All of the total power of your stereo is delivered globally to your multiroom speaker system. MS series selectors allow you to play any or all of your speakers at the same time. Regardless of the size of your system, the MS 6/8/10/12 selectors simply distribute everything your amplifier sends, safely and without loss. As you change the number of rooms/speakers playing, absolutely no change in volume or sound quality occurs. The secret to wastefree power distribution is the Master Series massive trifilar wound autoformers. Autoformers that are capable of distributing a 750 watt musical peak without distortion.

The MS series is designed and engineered to have a ruler-flat frequency response and ultra-low distortion. Audioplex delivers 20 to 20,000 Hz plus or minus .5dB.

Only Audioplex MS series selectors deliver all of your amplifier's power globally. This means that when the entire system is active, the power of your amplifier is perfectly distributed to each speaker. Of course, the system directs exactly the same amount of power to each speaker pair regardless of how many speakers are playing; so there are never any variations of volume when rooms are turned on and off.

The Audioplex Master Series of selectors incorporates amplifier protection that does not waste amplifier power. All of the total power of your stereo is delivered globally to your multiroom speaker system. MS series selectors allow you to play any or all of your speakers at the same time. Regardless of the size of your system, the MS 6/8/10/12 selectors simply distribute everything your amplifier sends, safely and without loss. As you change the number of rooms/speakers playing, absolutely no change in volume or sound quality occurs. The secret to wastefree power distribution is the Master Series massive trifilar wound autoformers. Autoformers that are capable of distributing a 750 watt musical peak without distortion.

The MS series is designed and engineered to have a ruler-flat frequency response and ultra-low distortion. Audioplex delivers 20 to 20,000 Hz plus or minus .5dB.

Only Audioplex MS series selectors deliver all of your amplifier's power globally. This means that when the entire system is active, the power of your amplifier is perfectly distributed to each speaker. Of course, the system directs exactly the same amount of power to each speaker pair regardless of how many speakers are playing; so there are never any variations of volume when rooms are turned on and off.

Autoformer based
Russound Load Balancing Speaker Selector Pro8 HP 8 Pair Russound Load Balancing Speaker Selector Pro12 HP 12 Pair Custom Audio CA-PRO10R 10 Pair Rack Mount Style Load Balancing Speaker Selector
List Price: $392.90
Our Price: $280.65
You save $112.25! In Stock
List Price: $514.37
Our Price: $367.41
You save $146.96! In Stock
List Price: $209.79
Our Price: $149.85
You save $59.94! In Stock
Custom Audio CA-PRO10R 10 Pair Rack Mount Style Load Balancing Speaker Selector
Autoformer based Autoformer based

Ideal in situations where up to 10 pairs of speakers are to be connected to a single amplifier, and individual on/off selection is required. Additionally, a two-position source selector allows global selection from two different source systems. High-powered non-inductive resistors ensure that the speaker load never falls below 4 ohm, even when all ten pairs of speakers are operating. Heavy-duty rocker switches are rugged enough for commercial use, while remaining suitable for residential applications. Detachable terminal strips accept up to 14AWG wire. The rugged steel panel is intended for 19" rack mounting, and occupies two rack spaces.

Russound SDB2.1 2 Pair Load Balancing Speaker Selector With Volume Controls Russound SDB4.1 4 Pair Load Balancing Speaker Selector With Volume Controls Russound SDB6.1 6 Pair Load Balancing Speaker Selector With Volume Controls
List Price: $221.83
Our Price: $158.45
You save $63.38! In Stock
List Price: $440.00
Our Price: $314.86
You save $125.14! In Stock
List Price: $556.40
Our Price: $397.43
You save $158.97! In Stock
Autoformer based Autoformer based Autoformer based
Russound Load Balancing Speaker Selector SS4.2 Four Position Russound Load Balancing Speaker Selector SS6.2 Six Position Phoenix Gold ISM-4 4 Pair Load Balancing Speaker Selector
List Price: $122.55
Our Price: $87.54
You save $35.01! In Stock
List Price: $164.14
Our Price: $117.24
You save $46.90! In Stock
List Price: $73.75
Our Price: $52.68
You save $21.07! (Out of Stock)
Phoenix Gold ISM-4  4 Pair Load Balancing Speaker Selector
. .

Sugg. Retail:  $99
Dimensions:  8 1/2" x 4 1/2" x 1 3/4

Phoenix Gold ISM-8 8 Pair Load Balancing Speaker Selector Audioplex INW-2D 2 Pair In-wall Load Balancing Speaker Selector Audioplex INW-4D 4 Pair In-wall Load Balancing Speaker Selector
List Price: $114.00
Our Price: $81.48
You save $32.52! (Out of Stock)
List Price: $207.90
Our Price: $148.52
You save $59.38! In Stock
List Price: $278.50
Our Price: $198.94
You save $79.56! In Stock
Phoenix Gold ISM-8 8 Pair Load Balancing Speaker Selector Audioplex INW-2D 2 Pair In-wall Load Balancing Speaker Selector Audioplex INW-4D 4 Pair In-wall Load Balancing Speaker Selector

Sugg. Retail:  $199
Dimensions:  17" x 4 1/2" x 1 3/4"

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

Audioplex INW-5 5 Pair In-wall Load Balancing Speaker Selector Audioplex INW-6 6 Pair In-wall Load Balancing Speaker Selector Audioplex INW-8 8 Pair In-wall Load Balancing Speaker Selector
List Price: $305.70
Our Price: $218.37
You save $87.33! In Stock
List Price: $347.80
Our Price: $248.43
You save $99.37! In Stock
List Price: $514.36
Our Price: $367.40
You save $146.96! In Stock
Audioplex INW-5 5 Pair In-wall Load Balancing Speaker Selector Audioplex INW-6 6 Pair In-wall Load Balancing Speaker Selector Audioplex INW-8 8 Pair In-wall Load Balancing Speaker Selector

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

Audioplex INW-12 12 Pair In-wall Load Balancing Speaker Selector Audioplex INWNP-2D 2 Pair In-wall Speaker Selector without protection Audioplex INWNP-4D 4 Pair In-wall Speaker Selector without protection
List Price: $684.24
Our Price: $488.74
You save $195.50! In Stock
List Price: $166.49
Our Price: $118.92
You save $47.57! In Stock
List Price: $237.39
Our Price: $169.56
You save $67.83! In Stock
Audioplex INW-12 12 Pair In-wall Load Balancing Speaker Selector Audioplex INWNP-2D 2 Pair In-wall Speaker Selector without protection Audioplex INWNP-4D 4 Pair In-wall Speaker Selector without protection

In-wall Speaker Selector with Autoformer Protection

The INW-Series allow you to play any combination of speakers simultaneously. Protection is autoformer type.

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

Audioplex INWNP-5 5 Pair In-wall Speaker Selector without protection Audioplex INWNP-6 6 Pair In-wall Speaker Selector without protection Audioplex INWNP-8 8 Pair In-wall Speaker Selector without protection
List Price: $250.00
Our Price: $178.64
You save $71.36! In Stock
List Price: $278.25
Our Price: $198.76
You save $79.49! In Stock
List Price: $305.80
Our Price: $218.44
You save $87.36! In Stock
Audioplex INWNP-5 5 Pair In-wall Speaker Selector without protection Audioplex INWNP-6 6 Pair In-wall Speaker Selector without protection Audioplex INWNP-8 8 Pair In-wall Speaker Selector without protection

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

Audioplex INWNP-12 12 Pair In-wall Speaker Selector without protection Audioplex IWC-100 In-wall 4 Pair Load Balancing Speaker Selector w/ Volume Controls 100-Watt 4 Pair Speaker Selector w/ Load Balancing Impedance Matching
List Price: $419.72
Our Price: $299.80
You save $119.92! In Stock
List Price: $557.98
Our Price: $398.55
You save $159.43! In Stock
List Price: $65.00
Our Price: $55.00
Sale Price: $49.98
You save $15.02! In Stock
Audioplex INWNP-12 12 Pair In-wall Speaker Selector without protection Audioplex IWC-100 In-wall 4 Pair Load Balancing Speaker Selector w/ Volume Controls

In-wall Speaker Selector without protection

The INW-Series allow you to play any combination of speakers simultaneously.

Must be used with Audioplex OptiMatch Volume Controls on each set of speakers.

The IWC-100 incorporates Audioplex OptiMatch amplifier protection.

Each zone's output can support one pair of 4 ohm speakers or two pairs of 8 ohm speakers.

Connect to any standard 8 ohm amplifier. Impedance is matched via the OptiMatch volume controls. Perfect for restaurants, bars or a small office complex, the IWC-100 and a good receiver or power amp supplies far higher volume than traditional commercial distribution systems with extraordinary clarity and bass response. No power is lost via heat or mismatching.

  • Buttons to select 4 pairs of speakers (all on, all off, or any number)
  • Power handling: 100 watts max
  • Headphone jack to monitor signals
  • Built-in overload protection
  • Dimensions: 11 3/4" W x 2" H x 6 1/2" D
100-Watt 6 Pair Speaker Selector w/ Load Balancing Impedance Matching ArchiTech Pro-Wire 4 Pair Speaker Selector
List Price: $75.00
Our Price: $69.00
Sale Price: $64.99
You save $10.01! In Stock
List Price: $134.95
Our Price: $69.00
You save $65.95! In Stock
  • Buttons to select 6 pairs of speakers (all on, all off, or any number)
  • Power handling: 100 watts max
  • Requires no external power
  • Headphone jack to monitor signals
  • Built-in overload protection
  • Dimensions: 11 3/4" W x 2" H x 6 1/2" D
OEM switchers provide nominal 8 Ohm load for amplifier protection against low impedance loads.

Barrier Termination Strip Construction provides positive wire terminations much superior to the Quick Connect type.  This design is preferred by experienced installation experts over inferior quick connect types.

Individual on/off switches for each pair of speakers.

Heavy Duty metal chassis and cases with high grade circuit boards.

The SW-4SPKR is designed to allow up to 4 pairs of 8 Ohm speakers to be connected to a stereo amplifier or receiver without damaging the amplifier.  These devices also function as Switching Stations to control all the speakers in a multi-room system from a central location.

The buttons are used to turn the individual pairs of speakers ON & OFF.  

Wiring from the amplifier to the SW-4SPKR should be a minimum of 16 gauge.  If wire is to be run through walls, it should be CL rated.  For runs over 100 feet 14 gauge wire may be used.

8 1/2 W x 2 H x 5 1/4 Deep