 |
 |
 |
|
This speaker is angled 20 degrees inside it's frame. So you can use
this for Home Theater applications where you want to aim ALL the sound
to your listening area, not just the tweeters. You can also find this
in our home theater surround sound packages as a 5 pack for 5.1 Dobly
Digital Surround. Add another pair for a 7.1 system. Excellent music
reproduction as well.
These speakers are sold in pairs for the
price listed. The woofers are made from Kevlar and the tweeters
made of titanium. In combination, they blend superbly to produce rich,
accurate sound reproduction. Kevlar/Titanium combination's are
widely found in far more expensive high end speakers that for years
were out of reach of the everyday homeowner.
Fully paintable as well.
The HD650A has that uncanny smart design that balances features, good sound, good looks at a very good price.
-Speaker Assembly: Mounted in 20 degree angled housing
-Woofer: 6 1/2" Kevlar cone with inverted butyl rubber surround, 1" voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure Titanium Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB board, independent 12 db woofer section, 12 db tweeter section, Polyimide auto protect over power reset automatic switch, Gold plated terminal posts will accept up to 14 AWG wire.
- 3 db attenuation switch for independent tweeter control
-Impedance: 8 ohm
-Sensitivity: 89 db measured with 1 watt / 1 meter away
-Maximum Thermal Power Rating: 125 Watts
-Frequency Response: 45 Hz - 20,000 Hz
-Dimensions: 9 3/8" x 5 1/4"
|
|
|
|
|
|
|
|
|
Copyright © 2009