HD650.1A ( 3 )-Speaker Assembly: Mounted in 20 degree angled housing
-Woofer: 6 1/2"
Provlar™ Woofers (new improved version of Kevlar) with inverted butyl rubber surround, 1" voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure
Zelenium™ Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB board, independent 12 db woofer section, 12 db tweeter section, Polyimide auto protect over power reset automatic switch, Gold plated terminal posts will accept up to 14 AWG wire.
- 3 db attenuation switch for independent tweeter control
-Impedance: 8 ohm
-Sensitivity: 89 db measured with 1 watt/ 1 meter away
-Maximum Thermal Power Rating: 125 Watts
-Frequency Response: 45 Hz - 20,000 Hz
-Dimensions: 9 3/8" x 5 1/4"
-Cut out dimensions: 8 1/4" (It's advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)
HD650.1C (4 Mid-sides and Rear)-Woofer: 6 1/2"
Provlar™ Woofers (new improved version of Kevlar) with inverted butyl rubber surround, 1" voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure
Zelenium™ Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB
board, independent 12 db woofer section, 12 db tweeter section,
Polyimide auto protect over power reset automatic switch, Gold plated
terminal posts will accept up to 14 AWG wire.
- 3 db attenuation
switch for independent tweeter control
-Impedance: Switchable 4 or 8
ohm
-Sensitivity: 88 db measured with 1 watt / 1 meter away
-Maximum
Thermal Power Rating: 125 Watts
-Frequency Response: 48 Hz - 22,000
Hz
-Dimensions: 9 1/2"x 4 1/2"
-Cut out dimensions: 8" (It's advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)
Perfect Ceiling Theater Speakers