HD525.1LCR (1 -- center speaker)

- LIFETIME WARRANTY
- Trimless Grill. Exclusive wafer-thin Rarefied-Grille™ 4mm
- Woofer: Dual 5.25" Provlar-Woofers™ (our new improved version of Kevlar), butyl rubber surround, 18 oz magnet, 1.
25" voice coil, video shielded
- Midrange: 3" Provlar-Woofers™, butyl rubber surround
- Tweeter: Dual 1" Pure Zelenium-Dome™, Ferro-fluid cooled, Neodymium magnet Swivels 30 degrees
- Crossover:
Phonalic PCB board, 12dB woofer section, 12dB tweeter section
-
Polyimide switch-auto protect reset switch, over power protection
- Overall Frequency response: 40 Hz- 26,500 Hz (+ - 9db)
- Low Frequency limit -3db: 60Hz
- Upper Frequency limit -3db: 25,000Hz
- Sensitivity: 89dB at 1W/ 1M
-
Maximum Thermal Rating: 150 watts
- Impedance: 4 or 8 ohm selectable
- Overall
Dimensions: 13 7/8" W x 9 7/8" W x 3 1/2" D Will fit horizontally between
standard stud width
- Cut out dimensions: 12 3/4" W x 8 7/8" H x 3 1/2" D (It's advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)
HD650.2W (4 each)
-LIFETIME WARRANTY
-Trimless Grill. Exclusive wafer-thin Rarefied-Grille™ 4mm
-Woofer: 6 1/2" Provlar-Woofers™ (our new improved version of Kevlar) with butyl rubber surround, 1" voice
coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure Zelenium-Dome™ pivots 30 degrees, ferro-fluid cooled, neodymium magnet,
wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB
board, independent 12 db woofer section, 12 db tweeter section,
Polyimide auto protect over power reset automatic switch, Gold plated
terminal posts will accept up to 14 AWG wire.
- 3/ 0/ +3 db
attenuation switchs for independent tweeter and woofer control
-Impedance:
Switchable 4 or 8 ohm
-Sensitivity: 89 db measured with 1 watt / 1
meter away
-Maximum Thermal Power Rating: 125 Watts
-Overall Frequency response: 40 Hz - 30,000 Hz (+ - 9db)
-Low Frequency limit -3db: 50Hz
-Upper Frequency limit -3db: 25,000Hz
-Dimensions: 12 1/8" x 8 3/4" x 3 1/2"
-Cut out dimensions: 11" x 7 1/2" (It's advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)
HD650.1A (6 each)
-LIFETIME WARRANTY
-Speaker Assembly: Mounted in 20 degree angled housing
-Trimless Grills. Exclusive wafer-thin Rarefied-Grille™ 4mm
-Woofer: 6 1/2" Provlar-Woofers™ (our new improved version of Kevlar) with butyl rubber surround, 1" voice coil, 22 oz. magnet with vented pole piece
-Tweeter: 1" Pure Zelenium-Dome™ pivots 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion design
-Crossover: Phonalic Heavy Duty Reinforced PCB board, independent 12 db woofer section, 12 db tweeter section, Polyimide auto protect over power reset automatic switch, Gold plated terminal posts will accept up to 14 AWG wire.
- 3 db attenuation switch for independent tweeter control
-Impedance: 8 ohm
-Sensitivity: 89 db measured with 1 watt/ 1 meter away
-Maximum Thermal Power Rating: 125 Watts
-Frequency Response: 45 Hz - 20,000 Hz
-Overall Dimensions: 9 3/8" x 5 1/4"
-Cut out dimensions: 8 1/4" (It's advised to NOT cut your opening until
you have the speakers in hand, a template is included with the speakers)