 |
 |
 |
 |
Complete Multi Room Audio System 6 Rooms InwallTech® HD650.1C Speakers (Qty. 6 pairs)
- Woofer: 6 1/2" Kevlar cone with inverted butyl rubber surround, 1"
voice coil, 22 oz. magnet with vented pole piece
- Tweeter: 1" Pure
Titanium Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet,
wide dispersion design
- Crossover: Phonalic Heavy Duty Reinforced PCB
board, independent 12 db woofer section, 12 db tweeter section,
Polyimide auto protect over power reset automatic switch, Gold plated
terminal posts will accept up to 14 AWG wire.
- 3 db attenuation
switch for independent tweeter control
- Impedance: Switchable 4 or 8
ohm
- Sensitivity: 88 db measured with 1 watt / 1 meter away
- Maximum
Thermal Power Rating: 125 Watts
- Frequency Response: 48 Hz - 22,000
Hz
- Dimensions: 9 1/2"x 4 1/2"
InwallTech® Speaker Selector SS6R (Qty. 1)
- Power Handling: 100 watts RMS per channel
- Frequency Response: 20 Hz - 22,000 Hz (+0dB, -0dB)
- Wire Size Acceptance: Up to 14 gauge wire
- Dimensions: 1 7/8" x 11 1/2" x 7"
- Maximum number of speaker connections:
- 4 pairs (4 ohm minimum)
- Minimum Amplifier Impedance w/All Speakers Selected:
- All 8 ohm speakers connected and engaged: 6 ohms
- All 4 ohm speakers connected and engaged: 5 ohms
InwallTech Volume Controls VC2100R (Qty. 6)
- Color: White
- Design: 12 Position In-Wall Stereo Volume Control
- Frequency Response : 35 Hz - 22,000Hz (+/- 3dB)
- Power Handling: 75 Watts RMS 100 Watts Max
- Impedance Matching Selectable: 1X (pass thru) 2X 4X 8X
- Connections: Detachable Terminal Strips Accept Up To 14 Gauge Wire
- Depth: 2 3/8"
InwallTech® HD650.1C Speakers (Qty. 6 pairs) - Woofer: 6 1/2" Kevlar cone with inverted butyl rubber surround, 1"
voice coil, 22 oz. magnet with vented pole piece
- Tweeter: 1" Pure
Titanium Dome pivots 30 degrees, ferro-fluid cooled, neodymium magnet,
wide dispersion design
- Crossover: Phonalic Heavy Duty Reinforced PCB
board, independent 12 db woofer section, 12 db tweeter section,
Polyimide auto protect over power reset automatic switch, Gold plated
terminal posts will accept up to 14 AWG wire.
- 3 db attenuation
switch for independent tweeter control
- Impedance: Switchable 4 or 8
ohm
- Sensitivity: 88 db measured with 1 watt / 1 meter away
- Maximum
Thermal Power Rating: 125 Watts
- Frequency Response: 48 Hz - 22,000
Hz
- Dimensions: 9 1/2"x 4 1/2"
InwallTech® Speaker Selector SS6R (Qty. 1) - Power Handling: 100 watts RMS per channel
- Frequency Response: 20 Hz - 22,000 Hz (+0dB, -0dB)
- Wire Size Acceptance: Up to 14 gauge wire
- Dimensions: 1 7/8" x 11 1/2" x 7"
- Maximum number of speaker connections:
- 4 pairs (4 ohm minimum)
- Minimum Amplifier Impedance w/All Speakers Selected:
- All 8 ohm speakers connected and engaged: 6 ohms
- All 4 ohm speakers connected and engaged: 5 ohms
InwallTech® Volume Controls VC2100R (Qty. 6) - Color: White
- Design: 12 Position In-Wall Stereo Volume Control
- Frequency Response : 35 Hz - 22,000Hz (+/- 3dB)
- Power Handling: 75 Watts RMS 100 Watts Max
- Impedance Matching Selectable: 1X (pass thru) 2X 4X 8X
- Connections: Detachable Terminal Strips Accept Up To 14 Gauge Wire
- Depth: 2 3/8"
To complete these systems, simply add your own stereo receiver. These can also be powered by the "Zone 2" or "Multi-Zone" speaker outputs on some theater receivers that are popular today. We recommend these receivers available on Amazon.com:
|
|
 |
 |
 |
 |

|