Speakers: InwallTech M65.1W (1.5 pairs)
- Woofer: 6.5" Aluminum Laminate PP cone with mica, rubber surround, 1" Voice coil, 22 oz magnet, vented pole piece
- Tweeter: 1" Synthetic Dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
- X-over: FR4 PCB board, 12dB woofer section, 12dB tweeter section
- Polyimide switch-auto protect reset switch, over power protection
- Gold plated terminal posts will accept 14AWG wire.
- Frequency Response: 50 Hz-22 Hz
- Sensitivity: 88dB at 1W/1M
- Maximum Thermal Rating: 125 watts
- Impedance: 8 ohms
- Overall Dimensions: 12 1/8" x 8 3/4" x 3 1/8"

Speakers: InwallTech M65.1C (1 pair)
- Woofer: 6. 5" Aluminum Laminate PP cone with rubber surround, 1" voice coil , 22 oz magnet
- Tweeter: 1" Synthetic Dome, pivot 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
- X-over: FR4 PCB board, 12dB woofer section, 12 dB tweeter section
- Polyimide switch-auto protect reset switch, over power protection
- Gold plated terminal posts will accept 14AWG wire.
- Impedance: 8 ohms
- Sensitivity: 88dB at 1W/1M
- Maximum Thermal Rated: 125 watts
- Frequency response: 50 Hz to 20,000 Hz
- Overall Dimensions: 9 1/8" x 3 1/4"
-Grill: Aluminum

Speakers: InwallTech M65.1W (1.5 pairs)
- Woofer: 6.5" Aluminum Laminate PP cone with mica, rubber surround, 1" Voice coil, 22 oz magnet, vented pole piece
- Tweeter: 1" Synthetic Dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
- X-over: FR4 PCB board, 12dB woofer section, 12dB tweeter section
- Polyimide switch-auto protect reset switch, over power protection
- Gold plated terminal posts will accept 14AWG wire.
- Frequency Response: 50 Hz-22 Hz
- Sensitivity: 88dB at 1W/1M
- Maximum Thermal Rating: 125 watts
- Impedance: 8 ohms
- Overall Dimensions: 12 1/8" x 8 3/4" x 3 1/8"

Speakers: InwallTech M65.1C (1 pair)
- Woofer: 6. 5" Aluminum Laminate PP cone with rubber surround, 1" voice coil , 22 oz magnet
- Tweeter: 1" Synthetic Dome, pivot 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
- X-over: FR4 PCB board, 12dB woofer section, 12 dB tweeter section
- Polyimide switch-auto protect reset switch, over power protection
- Gold plated terminal posts will accept 14AWG wire.
- Impedance: 8 ohms
- Sensitivity: 88dB at 1W/1M
- Maximum Thermal Rated: 125 watts
- Frequency response: 50 Hz to 20,000 Hz
- Overall Dimensions: 9 1/8" x 3 1/4"
-Grill: Aluminum


Wallplate: InwallTech TECH51
-5-way Gold plated Brass Binding Posts
-Decora style, dual gang wall plate utilizes low-profile Banana jacks (all color coded).
-2 Gold plated RCA (female to female) Connectors for Subwoofer.
-Providing connection for 5 Speakers.
-Front and Back have the same connectors to make the hookup quick and easy.
-Color coded (red & black), easy to tighten thumb screw Terminals
-Will accept up to 10 gauge Wire or Banana plugs on either side.
-Front and Back has the same RCA connectors for easy hookup.
-The posts are molded in the plates in a hex lock to prevent spinning while tightening them.
-Offers an audiophile quality inwall connection for your home theater project.
-Dimensions: 2 Gang
-Comes with Decora cover plate
-Comes un-assembled.

Frequently Asked Questions (FAQ):
What size of speakers should I use for theater?
Can I paint my speakers?
How do the speakers mount in the ceiling/wall?

All question in FAQ -- Here